The Ultimate Guide to Repairs

Camden Plumbing 2017: When Do You Need to Replace Your Water Heater When it comes to your water heater problems, regular maintenance can help in prolonging the lifespan of your heater and leaking or not heating issues can be handled through repair instead of replacement. It is pretty simple to replace a heating element or pressure-relief valve to fix water heater problems, and learning some troubleshooting tips can help you to deal with your minor water heater issues. You can always contact a professional such Camdem Plumbing Consultant to help you with any of your water heater problems, though simple water heater repairs that can be done DIY. According to water heater manufacturing companies, the average life expectancy of a water heater is eight to twelve years, and it varies depending on the design, location, installation quality, water quality, and maintenance schedule. Camden Plumbing Consultants highly recommend replacement of water heater if it is working erratically, more than ten years old, with leaks around the base of the tank, or if it suddenly stops working. The most common problem of water heaters is not getting enough heat or hotness that is caused by either a faulty thermostat or a defective heating element. It is essential to make sure that your electric water heater is maintained properly, ensuring that the power is connected, resetting the thermostat as needed, flushing the heater to eliminate sediments from the tank, replacing thermostat and heating element, and raising thermostat temperature. For gas water heater, ensure that the pilot is lit and the gas is connected, remove sediment by flushing, insulate hot water pipes, replace the Thermo coupler and clean the burner, and raise the temperature setting on the thermostat. For sizzling or hissing noises, it might be caused by collected sediment in the tank, so you need to drain the tank until the water clears. Removal and soaking of elements in a pan filled with vinegar should be done for up to an hour, and collected scale are scraped off. To resolve leaking pressure-relief valve, it must be replaced. Replacement of water fittings should be done if tightening them does not work. Water heater must be drained twice a year to remove sediments high cause corrosion. You can check the pressure-relief valve by lifting the handle of the valve and letting it snap back, and it should release a burst of water, otherwise new valve must be installed. When replacing your water heater, you need to consider the following features: gallon capacity (40 50 5 liters), recovery rate (number of gallons heated in an hour), dimensions and energy efficiency ratings. Allow Camden Plumbing Consultant to help you with your water heater replacement needs, please visit their website or homepage, or contact them directly.The Key Elements of Great Experts

The Key Elements of Great Experts